Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-73
v1.0, November 2010
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
(Switch) #show radius statistics name Default_RADIUS_Server
RADIUS Server Name............................ Default_RADIUS_Server
Server Host Address........................... 192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
TACACS+ Commands
TACACS+ provides access control for networked devices via one or more centralized servers.
Similar to RADIUS, this protocol simplifies authentication by making use of a single database that
can be shared by many clients on a large network. TACACS+ is based on the TACACS protocol
(described in RFC1492) but additionally provides for separate authentication, authorization, and
accounting services. The original protocol was UDP based with messages passed in clear text over
the network; TACACS+ uses TCP to ensure reliable delivery and a shared key configured on the
client and daemon server to encrypt all messages.
tacacs-server host
Use the tacacs-server host command in Global Configuration mode to configure a
TACACS+ server. This command enters into the TACACS+ configuration mode. The <ip-
address|hostname> parameter is the IP address or hostname of the TACACS+ server. To
specify multiple hosts, multiple
tacacs-server host commands can be used.
Format tacacs-server host <ip-address|hostname>
Mode Global Config