Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-14
v1.0, November 2010
no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value unit of time
is minutes.
telnetcon maxsessions
This command specifies the maximum number of Telnet connection sessions that can be
established. A value of 0 indicates that no Telnet connection can be established. The range is 0-5.
no telnetcon maxsessions
This command sets the maximum number of Telnet connection sessions that can be established to
the default value.
telnetcon timeout
This command sets the Telnet connection session timeout value, in minutes. A session is active as
long as the session has not been idle for the value set. The time is a decimal value from 1 to 160.
Format no session-timeout
Mode Line Config
Default 4
Format telnetcon maxsessions <0-4>
Mode Privileged EXEC
Format no telnetcon maxsessions
Mode Privileged EXEC
Note: When you change the timeout value, the new value is applied to all active and
inactive sessions immediately. Any sessions that have been idle longer than the
new timeout value are disconnected immediately.
Default 5
Format telnetcon timeout <1-160>
Mode Privileged EXEC