Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-21
v1.0, November 2010
assign-queue
This command modifies the queue id to which the associated traffic stream is assigned. The
queueid is an integer from 0 to n-1, where n is the number of egress queues supported by the
device.
drop
This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
mirror
This command specifies that all incoming packets for the associated traffic stream are copied to a
specific egress interface (physical port or LAG).
redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to
a specific egress interface (physical port or port-channel).
Format assign-queue <queueid>
Mode Policy-Class-Map Config
Incompatibilities Drop
Format drop
Mode Policy-Class-Map Config
Incompatibilities Assign Queue, Mark (all forms), Mirror, Police, Redirect
Format mirror <unit/slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
Format redirect
<unit/slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mirror