Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Log Messages 8-19
v1.0, November 2010
OSPFv3 Warning: OSPF LSDB is 90% full (15292
LSAs).
OSPFv3 limits the number of Link State
Advertisements (LSAs) that can be stored in
the link state database (LSDB). When the
database becomes 90 or 95 percent full,
OSPFv3 logs this warning. The warning
includes the current size of the database.
OSPFv3 The number of LSAs, 16992, in the OSPF
LSDB has exceeded the LSDB memory
allocation.
When the OSPFv3 LSDB becomes full,
OSPFv3 logs this message. OSPFv3
reoriginates its router LSAs with the R-bit
clear indicating that OSPFv3 is overloaded.
OSPFv3 LSA Checksum error detected for LSID
1.2.3.4 checksum 0x34f5. OSPFv3
Database may be corrupted.
OSPFv3 periodically verifies the checksum
of each LSA in memory. OSPFv3 logs this
Table 8-40: Routing Table Manager Log Messages
Component Message Cause
Routing Table
Manager
RTO is full. Routing table contains 8000 best
routes, 8000 total routes.
The routing table manager, also called
“RTO,” stores a limited number of best
routes, based on hardware capacity. When
the routing table becomes full, RTO logs
this alert. The count of total routes includes
alternate routes, which are not installed in
hardware.
Routing Table
Manager
RTO no longer full. Bad adds: 10. Routing
table contains 7999 best routes, 7999 total
routes.
When the number of best routes drops
below full capacity, RTO logs this notice.
The number of bad adds may give an
indication of the number of route adds that
failed while RTO was full, but a full routing
table is only one reason why this count is
incremented.
Table 8-39: OSPFv3 Log Messages
Component Message Cause