Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Management Commands 7-28
v1.0, November 2010
Access Commands
Use the commands in this section to close remote connections or to view information about
connections to the system.
disconnect
Use the disconnect command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to
close all active sessions, or use <session-id> to specify the session ID to close. To view the
possible values for <session-id>, use the show loginsession command.
show loginsession
This command displays current Telnet and serial port connections to the switch.
Secure Protocol Level(s) The protocol level may have the values of SSL3, TSL1, or both SSL3 and
TSL1.
Maximum Allowable HTTPS
Sessions
The number of allowable secure http sessions.
HTTPS Session Hard Timeout The hard timeout for secure http sessions in hours.
HTTPS Session Soft Timeout The soft timeout for secure http sessions in minutes.
Certificate Present Indicates whether the secure-server certificate files are present on the
device.
Certificate Generation in
Progress
Indicates whether certificate generation is currently in progress.
Format disconnect {<session_id> | all}
Mode Privileged EXEC
Format show loginsession
Mode Privileged EXEC
Term Definition
ID Login Session ID.
Term Definition