NETGEAR XSM7224S-100NAS Switch User Manual


 
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-149
v1.0, November 2010
When the optional arguments <unit/slot/port> or <vlan_id> are not used, the command
displays the following information:
When you specify the <unit/slot/port> values, the following information appears:
When you specify a value for <vlan_id>, the following information appears:
Term Definition
Admin Mode Indicates whether or not IGMP Snooping is active on the switch.
Multicast
Control Frame
Count
The number of multicast control frames that are processed by the CPU.
Interface
Enabled for
IGMP Snooping
The list of interfaces on which IGMP Snooping is enabled.
VLANS Enabled
for IGMP
Snooping
The list of VLANS on which IGMP Snooping is enabled.
Term Definition
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the interface.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the interface.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface before deleting the interface from the entry.This value may be
configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface because it did
not receive a report for a particular group on that interface. This value may be configured.
Multicast
Router Expiry
Time
The amount of time to wait before removing an interface from the list of interfaces with
multicast routers attached. The interface is removed if a query is not received. This value
may be configured.
Term Definition
VLAN ID The VLAN ID.
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the VLAN.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the VLAN.