Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Routing Commands 4-21
v1.0, November 2010
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled.
DHCP and BOOTP Relay Commands
This section describes the commands you use to configure BootP/DHCP Relay on the switch. A
DHCP relay agent operates at Layer 3 and forwards DHCP requests and replies between clients
and servers when they are not on the same physical subnet.
bootpdhcprelay cidoptmode
This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
Format show ip vlan
Modes • Privileged EXEC
• User EXEC
Term Definition
MAC Address
used by Routing
VLANs
The MAC Address associated with the internal bridge-router interface (IBRI). The same
MAC Address is used by all VLAN routing interfaces. It will be displayed above the per-
VLAN information.
VLAN ID The identifier of the VLAN.
Logical Interface The logical unit/slot/port associated with the VLAN routing interface.
IP Address The IP address associated with this VLAN.
Subnet Mask The subnet mask that is associated with this VLAN.
Default disabled
Format bootpdhcprelay cidoptmode
Mode Global Config