Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Quality of Service (QoS) Commands 5-8
v1.0, November 2010
show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
The following information is repeated for each user priority.
show classofservice trust
This command displays the current trust mode setting for a specific interface. The <unit/slot/
port> parameter is optional and is only valid on platforms that support independent per-port
class of service mappings. If you specify an interface, the command displays the port trust mode of
the interface. If you do not specify an interface, the command displays the most recent global
configuration settings.
Format show classofservice ip-dscp-mapping
Mode Privileged EXEC
Term Definition
IP DSCP The IP DSCP value.
Traffic Class The traffic class internal queue identifier to which the IP DSCP value is mapped.
Format show classofservice trust [<unit/slot/port>]
Mode Privileged EXEC
Term Definition
Non-IP Traffic
Class
The traffic class used for non-IP traffic. This is only displayed when the COS trust mode is
set to trust IP Precedence or IP DSCP (on platforms that support IP DSCP).
Untrusted Traffic
Class
The traffic class used for all untrusted traffic. This is only displayed when the COS trust
mode is set to 'untrusted'.