Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-3
v1.0, November 2010
boot autoinstall auto-save
This command is used to enable automatically saving the downloaded configuration on the switch.
.
no boot autoinstall auto-save
This command is used to disable automatically saving the downloaded configuration on the
switch.
boot autoinstall start
The command is used to start Auto Install on the switch. Auto Install tries to download a config
file from a TFTP server.
boot autoinstall stop
The command is used to A user may terminate the Auto Install process at any time prior to the
downloading of the config file. This is most optimally done when the switch is disconnected from
the network, or if the requisite configuration files have not been configured on TFTP servers.
Termination of the Auto Install process ends further periodic requests for a host-specific file.
Default Disabled
Format boot autoinstall auto-save
Mode Privileged EXEC
Format no boot autoinstall auto-save
Mode Privileged EXEC
Format boot autoinstall start
Mode Privileged EXEC
Format boot autoinstall stop
Mode Privileged EXEC