Filter
Top Products
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-44
v1.0, November 2010
no lease
This command restores the default value of the lease time for DHCP Server.
network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The
prefix-length is an integer from 0 to 32.
no network
This command removes the subnet number and mask.
bootfile
The command specifies the name of the default boot image for a DHCP client. The <filename>
specifies the boot image file.
Format no lease
Mode DHCP Pool Config
Default none
Format network <networknumber> [{<mask> | <prefixlength>}]
Mode DHCP Pool Config
Format no network
Mode DHCP Pool Config
Format bootfile <filename>
Mode DHCP Pool Config