Fujitsu DX8100 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Appendix J Factory Default List
J.2 Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1037
Modify iSCSI Port
Parameters
(When the port
mode is "RA")
IP Version IPv4
IPv4
IPv6
IPv4 / IPv6
IP Address 192.168.xxx.xxx
Up to 3 numeric characters
First text box
1 – 255
Other text boxes
0 – 255
Subnet Mask 255.255.255.0
Up to 3 numeric characters
All text boxes
0 – 255
IPv6 Link Local
Address
Address that is obtained from the
WWN of the ETERNUS DX Disk
storage system
fe80::xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF)
(hexadecimal, alphanumeric
characters)
TCP Port No. 3260
0 – 28671
TCP Window Scale 2
0 – 14
Congestion Control
Option
Enable
Enable
Disable
iSCSI Name iqn.2000-09.com.fujitsu:storage-
system.eternus-
xxxx
:000
yyyyy
The default value varies depend-
ing on the factory setting. Refer to
"The default value for "iSCSI
Name"" (page 1043) for details.
Alphabetic characters (lower
case) and numeric characters
Symbols "-" (hyphen), "."
(period), and ":" (colon)
The name starts with "iqn." or
"eui."
4 – 223 characters
VLAN ID Disable (*)
* When "VLAN ID" is "Enable", "0" is
displayed as a default value in the
text box.
Enable
Disable
When "VLAN ID" is "Enable"
0 – 4095
MTU 1300 When "IP Version" is "IPv4"
576 – 9000 (bytes)
When "IP Version" is "IPv6" or "IPv4
/ IPv6"
1280 – 9000 (bytes)
CHAP OFF
ON
OFF
REC Line No. 0
0 – 127
REC Transfer Mode
Sync
Async Stack
Async
Consistency
Async Through
Enable
Enable
Disable
Function Setting item Default value Allowed input