Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
943
The procedure to enable or disable the SMI-S function is as follows:
Procedure
1 Click [Setup SMI-S Environment] in [Action].
2 Select the parameters, and click the [Set] button.
• SMI-S
Select whether to "Enable" or "Disable" the SMI-S function.
→ A confirmation screen appears.
3 Click the [OK] button.
→ The SMI-S setting is performed.
Reboot the ETERNUS DX Disk storage system to apply the new setting.
This function can be used to check the current SMI-S setting and the SMI-S setting after rebooting. Refer to
"11.1.12 System Settings" (page 731)
for details.