Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
565
■ [Send Ping Command] Screen
Checks the connection status between the target port and the destination storage system.
• IP Address
Input the IPv4 or IPv6 address of the storage system that is used to check the connection status of
the target port.
The following IPv6 addresses can be used; "link local address", "global address", "unique local
address", and "6to4 address". Refer to "Available IPv6 Address" (page 757)
for details. When the
current setting is displayed, the IPv6 address is displayed as an abbreviation.
The following input conditions apply:
- For IPv4 address
• xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
• Class must be A, B, or C.
- For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
• Send Number
Input the transmission count of the ping command between 1 and 10.
• Result
Click the [Send] button to display the results of the ping commands that are sent.
- success
All were sent successfully.
- failed
At least one failure occurred.