Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
925
11.2.12.4 Start/Stop Performance Monitoring
This function acquires performance information and displays the result.
The Start/Stop Performance Monitoring function is used to start or stop acquiring the ETERNUS DX Disk storage
system performance information. Acquired information can be checked using the [Performance] function.
The procedure to start or stop performance monitoring is as follows:
■ Starting performance monitoring
The [Start] button is displayed when the "Monitoring State" is "Stopped".
Procedure
1 Click [Start/Stop Perfmon] in [Action].
2 Specify the interval, and click the [Start] button.
• Interval (sec.)
Input the interval to acquire the performance information between 30 and 300 (sec.) in units of 30
seconds.
→ A confirmation screen appears.
• When the ETERNUS DX Disk storage system is rebooted, the performance monitoring process is stopped.
• If performance monitoring is started from other monitoring software, GUI cannot stop the process.
• If performance monitoring is started from GUI, the process can be stopped from other monitoring
software.
If performance monitoring is started from CLI, GUI can stop the process. If performance monitoring is started
from GUI, CLI can stop the process.