Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
835
11.2.6.2 Setup Key Management Machine Name
This function specifies the name of the key management device (Key Management Machine).
The key management device name is used for the device that is to be used to connect to the key server.
The procedure to set the key management device name is as follows:
Procedure
1 Click [Setup Key Machine Name] in [Action].
2 Specify the key management device name, and click the [Set] button.
• Key Management Machine Name
Input the name of the device that is to be used to connect to the key server.
The key management device name corresponds to "Machine ID" in the key server.
The following input conditions apply:
- Up to 48 alphanumeric characters and symbols (underscore "_")
- The first letter must be an alphabetic character
→ A confirmation screen appears.
The key management device name cannot be specified when a common key (*1) is not registered. Refer to
"11.2.13.7 Register SED Authentication Key" (page 944)
for details.
*1: The common key for SEDs that are managed in the ETERNUS DX Disk storage system.
Do not change the key management device name after the key status changes to "Normal". The key
status can be checked on the [Key Group] screen. Refer to "11.1.5.1 Key Group" (page 723)
for details.