Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
297
Availability of Copy Functions
The following table shows the availability of copy functions when "Use Free License/ VAAI" or "Use VAAI" is
selected.
8.2.5 Delete Advanced Copy License
This function deletes all of the Advanced Copy licenses registered in the ETERNUS DX Disk storage system.
The procedure to delete an Advanced Copy license is as follows:
Procedure
1 Click [Delete License] in [Action].
→ A confirmation screen appears.
Copy Type ETERNUS DX80 S2/DX90 S2 ETERNUS DX410 S2/DX440 S2
ETERNUS DX8100 S2/DX8700 S2
Use Free License/VAAI Use VAAI
Advanced Copy Local OK (Up to eight sessions) NG
Remote NG NG
Full Copy by VAAI OK OK
• An Advanced Copy license cannot be deleted in the following conditions:
- When the CM status is other than "Normal"
- When an SDV or an SDPV has been registered
- When a volume that is Advanced Copy protected exists
- When an Advanced Copy session (except for an ODX session or an XCOPY session) exists
- When an Advanced Copy table size has been configured
- When an Advanced Copy path has been configured
- When REC Buffer has been configured
- When REC Disk Buffer has been created
- When a port with the RA mode exists
- When a port with the CA/RA mode exists
• Rebooting the ETERNUS DX Disk storage system is required after deleting an Advanced Copy license.