Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
929
3 Click the [OK] button.
→ Setting of the storage system name starts.
4 Click the [Done] button to return to the [System Settings] screen.
End of procedure
11.2.13.2 Modify Date and Time
This function sets the date/time and time zone (storage system location) of the internal clock in the ETERNUS
DX Disk storage system.
The clock is used for checking the internal log of the ETERNUS DX Disk storage system and in the ECO mode,
etc. The time zone setting is used for the Remote Support function.
This function is used when moving the ETERNUS DX Disk storage system to a new installation site, and/or
changing the system date/time.
It is possible to setup the NTP server to automatically set the time. If the NTP server cannot be used, resetting
the time once a month is recommended.
The procedure to set the date and time is as follows:
Procedure
1 Click [Modify Date and Time] in [Action].
When using ECO mode, make sure to set the time/date correctly.
If the date/time of the ETERNUS DX Disk storage system is wrong, processes for stopping and starting the disk
motor cannot be performed in accordance with the ECO mode schedule.
• When using the NTP server, the time modification method is the step mode (modify immediately).
• When using the NTP server, the ETERNUS DX Disk storage system is synchronized with the NTP server
every three hours.