Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
775
2 Click the [Add] button.
3 Add or edit the trap information, and click the [OK] button.
• Manager No.
Select a manager number from "Manager01" to "Manager10".
The management number of the SNMP Manager, which has been registered using the procedure in
"11.2.3.4 Setup SNMP Manager" (page 763)
, is displayed as an option.
• SNMP Version
Select the trap SNMP version from "v1", "v2c", or "c3".
• Community Name
Select the community name used when sending a trap.
The community name, which has been registered using the procedure in "11.2.3.7 Setup SNMP
Agent Community" (page 771), is displayed as an option.
If "v1" or "v2c" is selected as the "SNMP Version", the "Community Name" must be specified.
• User Name
Select the user name used when sending a trap.
The user name, which has been registered using the procedure in "11.2.3.6 Setup SNMP Agent User"
(page 768), is displayed as an option.
If "v3" has been selected as the "SNMP Version", the "User Name" must be specified.
• Port No.
Input the port number of the trap destination between 1 - 65535.
When changing a port number, enter a unique port number.
Click the [Trap No.] link to edit the existing trap.