Filter
Top Products
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
38
Chapter 3
Initial Setup
This chapter describes the Initial Setup function for the ETERNUS DX Disk storage system.
This function performs the required initial settings that must be set before operating the ETERNUS DX Disk
storage system on a series of wizard screens.
Initial Setup is divided into "Initial Setup 1" and "Initial Setup 2".
• Initial Setup 1
Performs the minimum settings required before using the ETERNUS DX Disk storage system.
• Initial Setup 2
Makes the reporting settings for when an error occurs in the ETERNUS DX Disk storage system. The settings
can be omitted if the reporting function will not be used.
If the browser is shut down during execution of Initial Setup, other functions will no longer be available. If
this case, forcibly log in using the same user name, and perform Initial Setup 1 again from the beginning.
However, if you have already reached Initial Setup 2, the wizard is executed from the beginning of Initial
Setup 2.
The settings made in the Initial Setup can be changed individually later.