Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
584
• Inquiry VPD ID Type
Set the Vital Product Data (VPD) information type to respond to the host.
VPD information includes the device information (Vendor ID, Product ID for each model, volume
number, etc.) for the volume.
Type1 and Type3 indicate the data format.
- Type3 (Default)
- Type1
- Type1 + Type3
• Inquiry Standard Data Version
Specify the Standard Data Version (version number of the SCSI standard) of the "Inquiry" command.
- Version 5 (Default)
- Version 4
- Version 3
• Command Timeout Interval
Select the setting method for the command timeout interval from the following items.
- Default (25sec.)
- Customize
When "Customize" is selected, input a value between 10 and 255 seconds (numeric).
• Load Balance Response
This field sets the response status when an overload-derived timeout is detected. The server retry
reaction is determined by this setting.
While the default response should normally be compatible with all systems, the setting may need
to be changed if problems occur.
- Unit Attention (Default)
- Busy
- Queue Full
• Reservation Conflict Response for Test Unit Ready
Select whether or not to notify the Reservation Conflict to the Test Unit Ready command when
volumes have been reserved from the other host.
- Normal (Default)
- Conflict
• Change Volume Mapping
Select whether or not to report to the host when a volume, which can be accessed from the host, has
been added or deleted.
- No Report (Default)
- Report
• Volume Capacity Expansion
Select whether or not to report to the host when the capacity of a volume has been changed.
- No Report (Default)
- Report
• Vendor Unique Sense Code
Select whether or not to report the asynchronous sense code to the host.
Asynchronous sense code indicates the unique sense code for each vendor that is not coincident
with host I/O.
- No Report (Default)
- Report