Filter
Top Products
Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
650
• Usage
The usage of the drive is displayed.
- For a drive that is used for user data or an unused drive: Data
- For a drive that is registered as a Global Hot Spare: Global Hot Spare
- For a drive that is registered as a Dedicated Hot Spare: Dedicated Hot Spare
• RAID Group
If the drive is registered in a RAID group, the RAID group name to which the drive belongs is displayed.
By clicking this item, the [RAID Group Detail] screen is displayed.
Filter Setting
10.1.4.1 Disks (Performance)
The drive performance information is displayed.
Filter Description
Enclosure Select the enclosure in which the target drive is installed.
Slot No.
Specify the slot number of the drive that is to be displayed.
When not using the slot number for filtering, leave this item blank.
Status Select the drive status that is to be displayed.
Capacity
Specify the capacity of the drive that is to be displayed.
When not using the drive capacity for filtering, specify "0".
Type Select the drive type that is to be displayed.
Usage Select the usage of the drive that is to be displayed.
• Performance information is obtained when performance monitoring is operated from GUI, CLI, or any
other monitoring software. Refer to "11.2.12.4 Start/Stop Performance Monitoring" (page 925)
for details
on how to start performance monitoring with GUI.
• The interval for acquiring performance information can be specified when starting the monitoring. When
using GUI, the default interval is 30 seconds.
• The average performance values during the specified interval are displayed.