Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
325
• Initiator / Target Setting
Select the port mode to set a copy path as RA.
- Initiator
- Target
The displayed screen is different depending on the port settings.
■ When "FC 1-Port", "FC 2-Port", or "FC 4-Port" is selected in the "Port Type" field
• When a device for which port setting is not completed exists
→ The [Device Configuration Setting] screen appears again. Proceed to Step 5
.
• When port setting is completed for all the selected devices
→ The [Device Information File Selection] screen appears. Proceed to Step 7
.
■ When "iSCSI-RA", "iSCSI-RA 1-Port", or "iSCSI-RA 2-Port" is selected in the "Port Type" field
→ The [iSCSI Port Information Setting] screen appears. Proceed to Step 6
.
■ When "iSCSI 1-Port" or "iSCSI 2-Port" is selected in the "Port Type" field and one or more ports used as
"RA" exist
→ The [iSCSI Port Information Setting] screen appears. Proceed to Step 6
.