Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
381
• Status
Whether the CA port group is used ("Active") or not ("Inactive") for the host affinity settings is displayed.
"Host affinity setting" is to specify association between "Host Group", "CA Port Group" and "LUN Group".
- Active
The CA port group is used for the host affinity settings. The LUN group can be accessed from the host
group via the CA port group.
- Inactive
The CA port group is not used for the host affinity settings. The CA port group is not being used.
9.1.4.1 FC Port
Parameters of the FC ports that are registered in the ETERNUS DX Disk storage system are displayed.
The following items are displayed in the Main area:
• Port
The location information of the target port is displayed.
- CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
• Type
The CA type of the target port is displayed.
- 8G FC
8Gbit/s (maximum) FC. The port mode can be changed (CA, RA, CA/RA, or Initiator).
- 16G FC
16Gbit/s (maximum) FC. The port mode can be changed (CA, RA, CA/RA, or Initiator).
• Status
The status of the target port is displayed.
• Port Mode
The mode of the target port is displayed.
- CA
- RA
- CA/RA
- Initiator