Fujitsu DX8100 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
824
Confirm Password
Select the "Change Password" checkbox and then input the password for proxy server authentication
again. When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
The following input condition applies:
- Up to 64 alphanumeric characters and symbols
A confirmation screen appears.
An error screen appears in the following conditions (when "Enable" is selected for the AIS Connect
function and a proxy server is specified):
- When the specified "Proxy Server" does not satisfy the input conditions
- When the same IP address is specified for "Proxy Server" and the MNT port or the RMT port
- When the IP address for "Proxy Server" and the network address for the MNT port or the RMT
port are the same
- When the IP address for "Proxy Server" and the broadcast address for the MNT port or the RMT
port are the same
- When the same IP address is specified for "Proxy Server" and "AIS Connect Server"
- When either of the "Proxy Server" or the "Port No." has been specified
- When "Port No." does not satisfy the input conditions
- When the "User Name" is not entered
- When the "User Name" does not satisfy the input conditions
- When "Password" is not entered (only when "Change Password" checkbox is selected)
- When "Password" does not satisfy the input conditions (only when "Change Password"
checkbox is selected)
- When "Confirm Password" is not entered (only when "Change Password" checkbox is selected)
- When "Confirm Password" does not satisfy the input conditions (only when "Change Password"
checkbox is selected)
- When "Password" does not match "Confirm Password" (only when "Change Password" checkbox
is selected)
When "Enable" is selected for "AIS Connect" and "Country of Installation (Country Code : Country
Name)" is not specified, an error screen appears.