Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
771
5 After adding or editing the user information, click the [Set] button.
→ A confirmation screen appears.
6 Click the [OK] button.
→ Setting of the SNMP Agent user starts.
7 Click the [Done] button to return to the [Network] screen.
End of procedure
11.2.3.7 Setup SNMP Agent Community
This function sets up the SNMP Agent Community.
The Community is a range of available networks for SNMP.
The setting value is used as the password for SNMP Manager to access the SNMP Agent of the ETERNUS DX
Disk storage system.
The SNMP Agent only accepts a request from SNMP Manager if the specified community names for SNMP
Manager and SNMP Agent are the same.
Up to ten communities can be specified for each ETERNUS DX Disk storage system.
• If the "SNMP Function" is disabled, the [Setup SNMP Manager] function cannot be used.
• The community name that is used in the settings in "11.2.3.8 Setup SNMP Agent Trap" (page 774)
cannot
be changed or deleted.