Filter
Top Products
Chapter 4 Configuration Settings
4.2 Configuration Settings for Using Standard Volumes (When Using Host Affinity Settings, Previously Referred to as LUN Mapping)
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
69
Create CA Port Group
Create a CA port group (a group of CA ports that are connected to the specified host group) that
is used for the server to access the ETERNUS DX Disk storage system.
Refer to:
-
Create FC Port Group
- Create iSCSI Port Group
- Create SAS Port Group
- Create FCoE Port Group
Add LUN Group
Create a LUN group (a group of volumes that are recognized from the server, which is
conventionally referred to as an "affinity group").
Correspond the volume number to the Logical Unit Number (LUN) that can be recognized by the
host for each LUN group.
LUN groups are recognized from the server by the host affinity setting that allocates the CA port
groups to the LUN groups.
Refer to:
-
Add LUN Group
Create Host Affinity
To recognize the LUN group from the server, select "All" for the host group and allocate the CA
port group and the LUN group.
Refer to:
-
Create Host Affinity
The concept of host connection settings are described in "Chapter 9 Connectivity
Management" (page 367). Refer to "Structures for Host Connection" (page 368)
for details.