Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
332
Set Copy Path
In this screen, set a copy path. Specify the Box ID of the target device in which the copy path is created, and
set the line information between devices.
Procedure
1 Click the [Remote Device Box ID] link to create a copy path.
→ The [Copy Path Setting] dialog box appears.
2 Set a copy path in the [Copy Path Setting] dialog box and click the [OK] button.
● Copy Path Setting
• Line Setting
Select a copy path. Up to eight copy paths can be selected.
Checkboxes are displayed only for the combinations meeting all the following conditions
(combinations to which a copy path can be set):
- The same port type (FC, iSCSI, or iSCSI-RA) is used for both the local device and remote device.
- The same IP version (v4, v6L, or v6C) is specified for the iSCSI ports that are used for both the
local and remote devices.
- RA port is used.
- For ETERNUS6000, the local device and the remote device have different port usages (Initiator/
Target).