Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
450
3 Register a host in a host group in the following procedures, and click the [Add] button.
■ When registering a host by selecting from the host list
(1) Click the [Now Connected] tab.
The following hosts are displayed in the [Now Connected] tab:
- Hosts that are connected to an iSCSI-CA or an iSCSI-CA/RA but are not registered in the ETERNUS
DX Disk storage system (*1)
*1: "Host that is not registered in the ETERNUS DX Disk storage system" indicates that a host with the
same iSCSI name, IP version, and Alias Name as the target host is not registered in the storage
system. The host is regarded as unregistered host even if a host with the same iSCSI name, IP version,
Alias Name, and different IP address is already registered. The obtained "iSCSI Name", "IP Version", "IP
Address", and "Alias Name" are displayed.
- Hosts that are connected to an iSCSI-CA or an iSCSI-CA/RA and registered in the ETERNUS DX Disk
storage system
- Hosts that are not connected to an iSCSI-CA or an iSCSI-CA/RA but are registered in the ETERNUS
DX Disk storage system
Click the [Rediscover] button to update the iSCSI host list.
The following modifications are applied for the host response settings with firmware version V10L15
or later.
• "Others" is changed to "Default".
• "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are deleted from the "Host Response" value.
• The setting parameters for "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are the same as
"Default".