Appendix J Factory Default List
J.3 System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1046
Setup SNMP Agent
Basic Interface
SNMP Function Disable
• Enable
• Disable
LAN Port used for
SNMP
MNT
• MNT
• RMT
Authentication
Failure
Send SNMP Trap
• Send SNMP Trap
• Do not send SNMP Trap
Engine ID Default
• Default
• Customize
Allowed input when "Customize" is
selected
- Alphanumeric characters (0 –
9, A – F, a – f)
- Inputting only "0" or "F" for the
"Engine ID" field is not allowed
- 10 - 64 characters (even
number)
MIB-II RFC Version RFC1213
• RFC1213
• RFC4293
Setup SNMP
Manager
IP Version IPv4
• IPv4
• IPv6
Setup SNMP Agent
MIB Access View
Subtree1 -
Subtree10
Inclusion
• Inclusion
• Exclude
Setup SNMP Agent
User
MIB View Setting ViewALL
• ViewALL
• View-mib2
• View-exmib
• View name that is registered in
"11.2.3.5 Setup SNMP Agent MIB
Access View" (page 766).
When accessing the MIB is not allowed
• Blank
If "ViewALL", "View-mib2", or "View-
exmib" is deleted in "11.2.3.5 Setup
SNMP Agent MIB Access View" (page
766), the deleted options are not
displayed in the "MIB View Setting"
field.
Authentication Disable
• Enable
• Disable
Authentication
Method
MD5
• MD5
• SHA
Encryption Disable
• Enable
• Disable
Function Setting item Default value Allowed input
