Filter
Top Products
Appendix J Factory Default List
J.3 System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
1044
J.3 System
■ Network Management
Function Setting item Default value Allowed input
Setup Network
Environment
(When using IPv4)
Network Port MNT
For ETERNUS DX80 S2/DX90 S2
• MNT
• RMT
For ETERNUS DX410 S2/DX440 S2,
ETERNUS DX8100 S2/DX8700 S2
• MNT
• RMT
• FST
Master IP Address For ETERNUS DX80 S2/DX90 S2
• MNT port
192.168.1.1
For ETERNUS DX410 S2/DX440
S2, ETERNUS DX8100 S2/
DX8700 S2
• FST port
192.168.1.1
• Up to 3 numeric characters
• All the text boxes
0 – 255
Subnet Mask For ETERNUS DX80 S2/DX90 S2
• MNT port
255.255.255.0
For ETERNUS DX410 S2/DX440
S2, ETERNUS DX8100 S2/
DX8700 S2
• FST port
255.255.255.0
• Up to 3 numeric characters
• All the text boxes
0 – 255
Speed and Duplex Auto-negotiation
• Auto-negotiation
• 1Gbit/s
• 100Mbit/s Half
• 100Mbit/s Full
• 10Mbit/s Half
• 10Mbit/s Full
Wake on LAN Disable
• Enable
• Disable
This item is displayed only when
"Network Port" is "MNT" or "RMT".