Fujitsu DX8100 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
456
4 Click the [OK] button.
Registration of the iSCSI host group starts.
5 Click the [Done] button to return to the [Host Group] screen.
End of procedure
9.2.2.3 Add SAS Host Group
This function creates a new SAS host group and registers which hosts are members of this group.
A SAS host group uses SAS as the interface type, and groups the hosts (HBAs), which access the same LUN
group. This function configures Host Affinity settings for each SAS host group.
The number of host groups and hosts that can be registered
*1: The total number of host groups irrespective of the interface types.
*2: The total number of hosts irrespective of the interface types.
When no hosts are registered in a host group, or when nine or more hosts are registered in a host
group (for ETERNUS DX8700 S2, 65 or more hosts are registered in a host group)
When the total number of host groups has exceeded the maximum number for the ETERNUS DX
Disk storage system
When the total number of hosts has exceeded the maximum number for the ETERNUS DX Disk
storage system
Click the [Continue] button to continue adding iSCSI hosts.
Model Number of host
groups (*1) per
storage system
Number of hosts
(HBAs) (*2) per
storage system
Number of hosts
(HBAs)
per CA port
Number of hosts
(HBAs)
per host group
ETERNUS DX80 S2 128 1024 256 8
ETERNUS DX90 S2