Filter
Top Products
Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
147
5.2.16 Forbid Advanced Copy
This function protects a volume so that the volume cannot be registered as the copy destination volume of
Advanced Copy.
The [Forbid Advanced Copy] is a function that protects the data in the selected volumes by forbidding the
volume to be the copy destination of the Advanced Copy sessions or restoration setting. When the Advanced
Copy function is used by multiple software, the same volumes may be used by multiple software, resulting in
unexpected data corruption. This function is available to protect the data in the copy source from being
deleted.
The procedure to protect a volume is as follows:
Procedure
1 Select the volume to be protected (multiple selections can be made) and click [Forbid
Advanced Copy] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ Setting of the copy destination protect starts.
3 Click the [Done] button to return to the [Volume] screen.
End of procedure
• If an Advanced Copy license is not registered, volume protection is not enabled. However, when using the
ETERNUS DX80 S2/DX90 S2, a free license is registered by default and volumes can be protected.
• "Standard", "TPV", "WSV", and "FTV" type volumes can be protected. Note that the ODX Buffer volumes can-
not be protected even when the volume type is "Standard", "TPV" or "FTV".
• This function cannot be used for volumes that are already protected.