Filter
Top Products
Chapter 4 Configuration Settings
4.1 Configuration Settings for Using Standard Volumes (When Using Host Affinity Settings)
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
64
Create Volume
Create a volume (drive area in the RAID group). A volume is a structural unit of RAID that can be
recognized from the server. Select "Standard" for "Type".
Refer to:
-
Create Volume
Add Host Group
Add the information of any server that accesses the ETERNUS DX Disk storage system via the
ports. When adding a server, create a host group (a host (HBA) group that accesses the same
LUN group). Assign a host response when creating a host group.
When creating new host groups, refer to:
- Add FC/FCoE Host Group
- Add iSCSI Host Group
- Add SAS Host Group
When adding hosts to existing host groups, refer to:
- Modify Host Group
Create CA Port Group
Create a CA port group (a group of CA ports that are connected to the specified host group) that
is used for the server to access the ETERNUS DX Disk storage system.
Refer to:
-
Create FC Port Group
- Create iSCSI Port Group
- Create SAS Port Group
- Create FCoE Port Group
The concept of host connection settings are described in "Chapter 9 Connectivity
Management" (page 367). Refer to "Structures for Host Connection" (page 368)
for details.