Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
501
■ When registering a host by manually specifying the host
(1) Click the [Manual Input] tab.
(2) Click the [Add] button.
→ The [Add SAS Host] screen appears.
(3) Specify the host information of the SAS host that is to be registered, and click the [OK] button.
- Name
Specify the SAS host name.
The following input conditions apply:
• Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
• Spaces
- SAS Address
Specify the SAS address of the SAS host.
The following input conditions apply:
• 16 hexadecimal numbers
• "F (f)" or "0" used in entire 16 characters are not allowed.
An error screen appears in the following conditions:
• When the "Name" is not entered
• When the "Name" does not satisfy the input conditions
• When the "Name" is already used for the registration target host or the same "Name" is already
used in the ETERNUS DX Disk storage system
• When the number of hosts that is to be registered is "0"
• When the number of registered hosts has exceeded the maximum number for the ETERNUS DX
Disk storage system