Filter
Top Products
Chapter 10 Component Management
10.1 Component Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
653
• Serial Number
The serial number of the CM is displayed.
• Hardware Revision
The hardware version of the CM is displayed.
• MAC Address (MNT)
The MAC address of the MNT Port is displayed.
This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/DX440 S2,
or the ETERNUS DX8100 S2.
• MAC Address (RMT)
The MAC address of the RMT Port is displayed.
This item is displayed only when using the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/DX440 S2,
or the ETERNUS DX8100 S2.
• MAC Address (FST)
The MAC address of the FST Port is displayed.
This item is displayed only when using the ETERNUS DX410 S2/DX440 S2 or the ETERNUS DX8100 S2.
• Active EC
The Edition Control (EC) number of the currently running firmware is displayed.
• Next EC
The EC number of the firmware that is to be run at the next power-on is displayed.
• CPU#n Clock
The clock frequency of CPU#0 or CPU#1 is displayed.
• CPU#n Status
The status of CPU#0 or CPU#1 is displayed. Refer to "B.5 Component Status" (page 977)
for details.
• CPU#n Status Code
The status code of CPU#0 or CPU#1 is displayed.
• CPU#n Error Code
The error code of CPU#0 or CPU#1 is displayed.
■ Internal Parts