Fujitsu DX8100 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
295
8.2.4 Register Advanced Copy License
This function registers the Advanced Copy license for EC, OPC, QuickOPC, SnapOPC, SnapOPC+, and REC.
There are two types of Advanced Copy licenses:
Paid License
All of the Advanced Copy functions can be used.
Free License
For the ETERNUS DX80 S2/DX90 S2, up to eight sessions with the local Advanced Copy function can be
used.
When this registration is complete successfully, the customer can use the Advanced Copy functions.
The procedure to register an Advanced Copy license is as follows:
Procedure
1 Click [Register License] in [Action].
2 Select a registration method, enter an Advanced Copy license key to be registered, and click
the [Register] button.
Registration Method
To register a paid license, select "Input License Key" and enter the Advanced Copy license key that is
to be registered.
When using the Full Copy function of VMware vStorage APIs for Array Integration (VAAI) with
controller firmware version V10L20 or later, registering an Advanced Copy license is not required.
When using a free license for the ETERNUS DX80 S2/DX90 S2, select "Use Free License/VAAI".
If the Advanced Copy license is already registered, "Use Free License/ VAAI" and "Use VAAI" cannot be
selected.
Refer to "Availability of Copy Functions" (page 297)
for the availability of copy functions when
selecting "Use Free License/VAAI" or "Use VAAI".
There are no free licenses for the ETERNUS DX410 S2/DX440 S2 or ETERNUS DX8100 S2/DX8700 S2
When using ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express, perform the required settings
described in the documents that are supplied with ETERNUS SF AdvancedCopy Manager or ETERNUS SF
Express.
The registration status of the Advanced Copy license can be checked. Refer to "8.1.6 Setting (Advanced
Copy)" (page 268) for details.