Filter
Top Products
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
331
The displayed screen is different depending on the port setting status.
■ When selecting "Registration by manual operation"
→ The [Device Configuration Setting] screen appears again. Proceed to Step 5
.
■ When selecting "Finish of Registration by File Reading"
→ The [Check Registered Device Information] screen appears. Proceed to Step 9
.
9 Check the device information, and click the [Next >>] button.
→ The [Copy Path Creation Device Selection] screen appears. Proceed to "Set Copy Path" (page 332).
End of procedure
• The unique number can be checked by the WWN of the FC port. All of the FC ports in a storage
system have the same unique number. The displayed screens for each storage system model are as
follows:
- For ETERNUS DX90 S2, ETERNUS DX410 S2/DX440 S2, or ETERNUS DX8100 S2/DX8700 S2:
→ Port information (FC) of the [Channel Adapter Detail] screen
- For ETERNUS DX90:
→ Port status (FC) of the [Storage System Status] screen
- For ETERNUS DX410/DX440, ETERNUS DX8100/DX8400/DX8700, or ETERNUS4000/
ETERNUS8000:
→ CA Detailed Information screen (FC) of the [Device Status] screen
- For ETERNUS6000:
→ WWN list (FC) of the [Device Status] screen
• If only iSCSI ports are installed in a storage system, the unique number can be checked by the
default iSCSI name. All of the iSCSI ports in a storage system have the same unique number. For
"iSCSI 1-Port" or "iSCSI 2-Port", the last four digits of the iSCSI name indicate the unique number.
[Example]
For the default iSCSI Name iqn.2000-09. com.fujitsu:storage-system.eternus-dx400:00044205:
[4205].
Note that the iSCSI name is a parameter that can be customized. It is not possible to check whether
the iSCSI name is customized or not. In this case, create an REC device information file using the
[Export Storage Information] function and register the device by file reading.