Filter
Top Products
Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
194
The procedure to set ECO mode schedule for the RAID group is as follows:
Procedure
1 Select the RAID group to apply the ECO mode schedule (multiple selections can be made) to
and click [Assign ECO Mode] in [Action].
2 Select the ECO mode schedule that is to be applied, select whether to enable ("ON") or
disable ("OFF") ECO mode, and then click the [Assign] button.
• ECO Mode Schedule
Select the ECO mode schedule that is to be applied.
- No Change
Do not change the current setting.
- Disable
Disable the ECO mode.
- ECO mode schedule name
Apply the selected ECO mode schedule.
• ECO Mode Action
Select whether to enable ("ON") or disable ("OFF") the ECO mode setting. Select "No Change" to use
the current setting.
- No Change
Do not change the current setting.
- ON
Enable the ECO mode.
- OFF
Disable the ECO mode.
→ A confirmation screen appears.
• When selecting multiple RAID groups as the target of the ECO mode, the same ECO mode schedule can be
specified for all the selected RAID groups.
• RAID groups that configure a WSV can be checked in the [Volume Detail] screen ([WSV Concatenation]
Tab). Refer to "5.1.14 Volume Detail (WSV Concatenation)" (page 93)
for details.