Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
614
2 Select the SAS port bandwidth limit, and click the [Set] button.
• Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3 Click the [OK] button.
→ The SAS port QoS setting starts.
4 Click the [Done] button to return to the [SAS Port QoS] screen.
9.2.7.12 Set FCoE Port QoS
This function specifies the bandwidth limit (maximum performance limit) for the FCoE port.
This function can be used, irrespective of whether the Host-LU QoS is enabled or disabled. However, if the
Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the
Host-LU QoS is enabled.
