Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
540
• Frame Size
Select the frame size of the target port.
"Frame Size" specifies the length of the communication information.
- 512 bytes
- 1024 bytes
- 2048 bytes
• WWN (Port Name)
When Storage Migration is performed, the ETERNUS DX Disk storage system (destination storage
system) is regarded as a server connecting to the migration source storage system. Specify the
World Wide Port Name (WWPN) for the server that was connected to the FC-CA port of the migration
source storage system.
The default "WWN (Port Name)" is displayed with parentheses on the right side of the [Default]
button. Click the [Default] button to set the default value.
• WWN (Node Name)
When Storage Migration is performed, the ETERNUS DX Disk storage system (destination storage
system) is regarded as a server connecting to the migration source storage system. Specify the
World Wide Node Name (WWNN) for the server that was connected to the FC-CA port of the
migration source storage system.
The default "WWN (Node Name)" is displayed with parentheses on the right side of the [Default]
button. Click the [Default] button to set the default value.
→ A confirmation screen appears.
Specifying the WWPN of the server is only required when the host affinity setting is configured
between the server and a migration source FC-CA port.
If LUN mapping is configured for a migration source FC-CA port, the default value does not need to
be changed.
Specifying the WWNN of the server is only required when the host affinity setting is configured
between the server and a migration source FC-CA port.
If LUN mapping is configured for a migration source FC-CA port, the default value does not need to
be changed.