Filter
Top Products
Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
278
The following items are displayed in the Main area:
• Session ID
The session ID selected in the [Local Copy] screen is displayed.
• Source Volume Name
The copy source volume name is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
• Destination Volume Name
The copy destination volume name is displayed. When the "Status" is " Reserved", a "-" (hyphen) is
displayed. When the "Type" is "MON", a "-" (hyphen) is displayed.
• Copy Range
The copy range of the copy session is displayed. If the status is " Reserved", a "-" (hyphen) is displayed.
- Totally
Whole volume
- Extent
Part of volume
• Secondary Access Permission
If the status is " Active", accessibility from the host to the copy destination volume is displayed. This
item is displayed in EC. If the status is " Reserved", a "-" (hyphen) is displayed.
- Read Only at Equivalency
When the "Phase" is "Equivalent", only read access to the copy destination volume is allowed
- No Read/Write
No read/write access to the copy destination volume is allowed
• Concurrent Suspend Status
When an instruction to collectively and tentatively separate multiple pairs of a copy source volume and a
copy destination volume (Concurrent Suspend request) is received in EC session, transition status to
"Suspend" is displayed. This item is displayed in EC. If the status is " Reserved", a "-" (hyphen) is dis-
played. If the Concurrent Suspend Status cannot be obtained, "Unknown" is displayed.
- Normal
Transition to "Suspend" status is complete or Concurrent Suspend cannot be performed
- Exec
Transition to "Suspend" status in progress
- Error
Transition to "Suspend" status failed
- Unknown
A status other than the ones listed above
Refer to "8.1.2 Advanced Copy (All Local Sessions)" (page 254) for the display items that are not described in
this section.