Fujitsu DX8100 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
811
SMTP Server
- SMTP Server *
Input the IP address or the domain name of the SMTP server that is used for REMCS operation.
The following input condition applies:
Up to 63 alphanumeric characters and symbols (except space)
- Port No. *
Input the port number of the SMTP server.
The following input condition applies:
Numeric characters ("0" - "65535")
- Sender Mail Address *
Input the sender E-Mail address of mails sent by the ETERNUS DX Disk storage system for REMCS
operations.
The following input condition applies:
Up to 63 alphanumeric characters and symbols (except space)
SMTP Authentication Information
- Authentication Type
Select the SMTP authentication type.
No SMTP Authentication
POP Before SMTP Authentication
AUTH SMTP Authentication
- Authentication Method
When "AUTH SMTP Authentication" is selected for "Authentication Type", specify the SMTP
authentication method.
Automatic
CRAM-MD5
PLAIN
LOGIN
- POP Server
When the "Authentication Type" is "POP Before SMTP Authentication", enter the domain name or
the IP address of the POP server that is used for SMTP Authentication.
The following input condition applies:
Up to 63 alphanumeric characters and symbols (except space)
- Port No.
Input the port number that is used when communicating with the POP server.
The following input condition applies:
Numeric characters ("0" - "65535")
- User Name
Input the user name that is used when communicating with the POP server.
This setting is enabled when selecting "POP Before SMTP Authentication" or "AUTH SMTP
Authentication" for the "SMTP Authentication Type".
The following input condition applies:
Up to 32 alphanumeric characters and symbols (except space)
- Password
Input the password that is used when communicating with the POP server.
This setting is enabled when selecting "POP Before SMTP Authentication" or "AUTH SMTP
Authentication" for the "SMTP Authentication Type".
The following input conditions applies:
Up to 64 alphanumeric characters and symbols (except space)