Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
527
3 Click the [OK] button.
→ Registration of the FCoE port group starts.
4 Click the [Done] button to return to the [CA Port Group] screen.
End of procedure
9.2.3.5 Delete CA Port Group
This function deletes a CA port group. When a CA port group is deleted, the ports, which belong to the CA port
group, are also deleted.
The procedure to delete a CA port group is as follows:
Procedure
1 Select the CA port group to be deleted (multiple selections can be made) and click [Delete
Port Group] in [Action].
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the port group name overlaps with an existing port group name (port group names cannot
overlap with any other port group names, irrespective of the CA types)
• When the total number of ports has exceeded the maximum number for the ETERNUS DX Disk
storage system
• When no ports are registered in a port group, or when nine or more ports are registered in a port
group
• When the specified port does not exist in the ETERNUS DX Disk storage system
• When the port mode of the selected port is other than "FCoE"
• When there are ports of which affinity mode is enabled ("ON") and disabled ("OFF") existing
together
CA port groups that are being used for the host affinity settings cannot be deleted.