Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
573
2 Select the port mode to be changed over to, and click the [Set] button.
• Port Mode (After)
Select from "CA", "RA", "CA/RA", or "Initiator" for the changed port mode.
"Initiator" is displayed only for FC ports.
The current port mode is displayed by default.
- CA
- RA
- CA/RA
- Initiator
→ A confirmation screen appears.
3 Click the [OK] button.
→ Port mode changeover starts.
• If the specified FC-Initiator port is configured in Storage Migration path, an error screen appears.
• When using the ETERNUS DX80 S2, "RA" and "CA/RA" is not displayed in the "Port Mode (After)"
field.
"iSCSI-RA" type ports are not displayed in the port list.