Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
768
5 After adding or editing the MIB View, click the [Set] button.
→ A confirmation screen appears.
6 Click the [OK] button.
→ Setting of the SNMP Agent MIB View starts.
7 Click the [Done] button to return to the [Network] screen.
End of procedure
11.2.3.6 Setup SNMP Agent User
This function sets up the user which accesses the SNMP Agent.
The security level and the MIB access range are configured for each user.
Up to ten users can be specified for each ETERNUS DX Disk storage system.
• If the "SNMP Function" is disabled, the [Setup SNMP Manager] function cannot be used.
• The user name that is used in the settings in "11.2.3.8 Setup SNMP Agent Trap" (page 774)
cannot be
changed or deleted. However, note that some of the user information (MIB View Setting, Authentication,
and Encryption) can be changed.