Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
389
9.1.6 Host Response
The registered host responses are displayed.
The host response configures the appropriate operation mode on which the host makes connection. The usual
host connection uses a recommended pattern or the default setting which have been arranged in advance in
accordance with each OS type.
When customizing the host response in accordance with the OS type or the operating environment, refer to
"9.2.5.1 Add Host Response" (page 581)
.
The following items are displayed in the Main area:
• Name
All of the host responses, which have been registered in the ETERNUS DX Disk storage system, are
displayed.
- Solaris MPxIO
- HP-UX
- AIX EMPD (*1)
- AIX VxVM
- AIX Single Path
- VS850/SVC
- Host responses created in the ETERNUS DX Disk storage system
- Default
*1: EMPD: ETERNUS Multipath Driver
The following modifications are applied for the host response settings with firmware version V10L15 or
later.
• "Others" is changed to "Default".
• "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are deleted from the "Host Response" value.
However, these parameters are displayed if they are applied for host groups.
• The setting parameters for "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are the same as
"Default".