Configuration 3: R8si<—x.25 —> R8r Gateway
<—ethernet—> R8si
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
114
Enable Link?: Set to y after the processor channels have been
assigned.
Maintenance Extension: Specified on dial plan.
Destination Number: TAC (812) + extension (2102) of the data module on
the far end that will establish the connection.
Establish Connection? n means that the switch at the remote end of this
connection (Switch 1 in this case) will be responsible
for the call setup. Enter y when administering the data
module for Switch 1.
Connected Data
Module:
This is an information-only field.
Keep the default values for the rest of the fields.
Field Conditions/Comments
2 of 2