Filter
Top Products
Configuration 4: R8csi <—ISDN—> R8si Gateway
<—ppp—> R8csi
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
144
> Submit the screen
End
Session - Local The Local and Remote Session numbers can be any value
between 1 and 256 (si model) or 384 (r model), but they must
be consistent between endpoints. For each connection, the
Local Session number on this switch must equal the Remote
Session number on the remote switch and vice versa.
It is allowed, and sometimes convenient, to use the same
number for the Local and Remote Session numbers. It is
allowed, but not recommended, to use the same Session
numbers for two or more connections.
Session -
Remote
Mach ID Destination switch ID identified on the dial plan of the
destination switch.
Processor Channel 32: (connection to Switch 1 for gateway to Switch 2)
Enable Set to y.
Appl.: Set to dcs for DCS signaling.
Mode Node-3 is the “client” for this session. Set node-1 to “server”
(s).
Interface Link This must match the link number assigned on the data module
screen.
Interface Chan A value of 0 allows any available interface channel to be used
for this connection. This number must match the Destination
Port number on the Switch-1 Processor Channel screen.
Destination
Node
Node name for the gateway through which the destination is
reached. This must be a name entered on the Node Names
screen. For ppp connections, it must match the Destination
Node Name entered on the ppp Data Module screen.
Destination Port This must match the Interface Channel number assigned on
the Switch-1 Processor Channel screen.
Session - Local
For each connection, the Local Session number on this switch
must equal the Remote Session number on the remote switch
and vice versa.
Session -
Remote
Mach ID Destination switch ID identified on the dial plan of the
destination switch.
Field Conditions/Comments
2 of 2