Lucent Technologies Release 8.2 Server User Manual


 
Configuration 5B: R8csi <—ppp—> R8r (2 C-LANs)
<—ethernet—> R8si
3 C-LAN Administration
Administration for Network Connectivity
CID: 77730 555-233-504 — Issue 1 — April 2000
174
Switch 1 Task — Assign Node Names
This task assigns node names and IP addresses to each node in the network. This
screen is administered on Switch 1. A Node Names screen must be administered on
each switch in the network.
Note: Enter node names for Intuity AUDIX and MSA adjuncts on page 1. Enter
node names for switches, routers, and CMS starting on page 2.
Begin
Steps
> Open Node Names form — enter ch node-n
> Go to page 2
> Enter values.
> Submit the screen1
End
change node-names Page 2 of 6
NODE NAMES
Name IP Address Name IP Address
default
_________ 0__.0__.0__.0__ _______________ ___.___.___.___
node-1a-ppp
192.168.10_.11_ _______________ ___.___.___.___
node-1a ______ 192.168.10_.13_ _______________ ___.___.___.___
node-1b
______ 192.168.10_.130 _______________ ___.___.___.___
node-1b-eth __
192.168.10_.128 _______________ ___.___.___.___
node-2____ 192.168.10_.12_ _______________ ___.___.___.___
node-3____
192.168.10_.129 _______________ ___.___.___.___
Field Conditions/Comments
Name Enter unique node names for the following 6 nodes:
C-LAN(a) PPP port on Switch 1 for the connection to Switch 2
C-LAN(a) PPP port on Switch 1 for the connection to C-LAN(b)
C-LAN(b) PPP port on Switch 1 for the connection to C-LAN(a)
C-LAN(b) Ethernet port on Switch 1
C-LAN PPP port on Switch 2.
C-LAN Ethernet port on Switch 3
IP Address The unique IP addresses of the nodes named in the previous field.