Lucent Technologies Release 8.2 Server User Manual


 
Networking Screens
263
Administration for Network Connectivity
555-233-504 — Issue 1 — April 2000 CID: 77730
A Screens Reference
Data Module — Type
ppp
Use the ppp data module for direct point to point TCP/IP connections between DCS
nodes. This data module associates a link number and destination node with the port
address and node name for the local node.
The fields on this form can be changed only when the corresponding port on the
C-LAN circuit pack has been busied-out.
Common Fields See Common Data Module Fields (256) for descriptions of fields on this screen that
are not listed below.
Subnet Mask The subnet mask is used to specify the network and host portions of the IP address for
the C-LAN port that is identified in the Port field. The IP address is administered on
the Node Names screen and is associated with the port location via the node name,
which is a common field on the Node Names and ppp Data Module screens.
When a new ppp Data Module is created, the system populates the Subnet Mask field
with one of three default subnet masks, depending on the node name you enter in the
Node Names field. If the node name is associated with a Class C address on the Node
Names screen, the Subnet Mask field is populated with the default Class C subnet
mask, 255.255.255.0. Similarly, if the node name is associated with a Class A or
Class B address on the Node Names screen, Class A (255.0.0.0) or Class B
(255.255.0.0) default subnet masks automatically populate the Subnet Mask field.
The default subnet masks correspond to no subnetting. If you want to create
subnetworks, you have the option to override the default subnet mask by entering a
different subnet mask in the Subnet Mask field. If you enter a subnet mask, the system
checks it for validity. For Class C addresses, there are 5 valid subnet masks. For Class
B addresses there are 13 valid masks and for Class A addresses there are 21 valid
masks.
add data-module next
Page 1 of x
DATA MODULE
Data Extension: Name: _ ___ BCC: 2
Type: ppp COS: 1
Port: COR: 1
Link: _ TN: 1
Enable Link? n
Node Name: ___
Subnet Mask: 255.255.255.0
Establish Connection: _
DESTINATION
Digits:
_______
Node Name: ___ ______
CHAP? y
Chap Secret: